Zaldi Dressage Saddle Drim

0 €0.00

Description

Handmade. 15 points for rider and horse.

Configurable (choose armor, footpegs, seat, skirt, skirt, knee pads, hoses and leather to your liking).

1.- NEW ANTI SHOCK PROTECTION: In viscolastic rubber of slow recovery siliconized of 4 cm.

2 .- SEAT VERY COMFORTABLE SERIES: Formed by 3 layers of rubber, 2 layers "elax" high density silicone and 1 layer of latex.

3.- ELASTIC ANTI-SHOCK SHELL: New protection of 2.5 centimeters, higher, made of croupon leather and molded material to prevent breakage of the armor in case of a blow or fall.

4.-NEW TWO-DENSITY ARMOUR (with different densities for rider and horse): Dual density anatomical armor (rider + horse), made of polypropylene modified with EPDM (ethylene propylene diene rubber) and talc. It allows combining multiple characteristics of rigidity, deformation and energy absorption on different surfaces. The result of a continuous R&D&I process in collaboration with the Foundation for Research and Development in Transport and Energy (CIDAUT). This new armor provides a complete adjustment to the horse's back, together with the development of the double density that benefits horse and rider. Made in the lower part of the horse mode density (1.5 cm thick), it expands the rider's weight over a wider area of the horse, avoiding specific pressure points. Its 10% elasticity allows a reverse rotation so that the horse has total mobility.

The horse mode density is used in the lower area of the armor that is in contact with the horse's back. It is the product of years of studies in measuring the pressure produced under the saddle. Research in search of a density that distributes the pressure of the rider's weight evenly throughout the horse's dorsal musculature.

By deconcentrating the pressure on a homogeneous map, we avoid overloading the dorsal muscle mass. We thus promote good condition, eliminating the dreaded fascial restrictions that these specific pressure points can cause. These could degenerate into mechanical dysfunctions and even pain for our horse.

Its open structure in the front area and the side arms allow a full adaptation to the neck and back area. In the upper part, the design has been optimized and the new rider mode density (0.5 cm. thick) has been applied, which is very elastic, absorbs shocks and prevents them from reaching the horse. It confers durability and resistance use after use. Collects the pressure of the rider on the contact surface thanks to thousands of contact points, producing a feeling of weightlessness without pressure points. By distributing the weight evenly we obtain a progressive positive result, the longer the riding time, the more pleasant. The area of contact with the rider has been ergonomically designed by raising the side areas that allow to release pressure on the urethral area of the rider avoiding health problems later, decreases the contact allowing the proper blood supply to the area.

The upper part describes a curvature adapted to the rider's anatomy achieving even greater comfort. It relieves your spine by pushing the pelvis forward and placing the back in a correct and comfortable riding position.

5.- NEW INTELLIGENT RIDER'S PAD: With a crossguard design consisting of a 1 centimeter layer of intelligent latex rubber that acts as a crossguard. Interior with anti-humidity wool padding to avoid caking of the base.

6.- EXTRA COMFORT LIVE: New inclination of the live to avoid discomfort to the rider's thighs during riding.

ERGONOMIC SKIRT: Its conformation favors the adjustment of the rider to an unbeatable riding position.

8.- ANTI-LIJA EFFECT REINFORCEMENT: Made of croupon, it provides greater durability to the saddle.

9.- DOUBLE SEWING OF THE SADDLES: Reinforcement of double stitching with waxed thread of maximum resistance.

10.- FIRST ELASTIC LATIGUILLO: Facilitates movement and does not diminish the horse's thoracic capacity. Relieves pressure on the back. SECOND LATIGUILLO IN "V-SYSTEM" that fixes the whole saddle to the horse, avoiding the swinging without causing pressure on the horse's back.

AIR INTAKE IN THE INSIDE KNEE: Line of holes to facilitate the circulation of air in the knee pad and that favors an adjustment to the pressure at all times.

TM-SYSTEM: see separate info.

13.- ANATOMIC SERIAL BASE: With new triangular shape to facilitate the movements of the horse and adjust the position of the rider in the pressure.

MONOQUARTIER EFFECT: by sewing the skirt to the cantle. A 10 centimeter stitching is made joining the skirt to the cantle, achieving a monoquartier effect, to prevent the skirt from moving due to use and the action of pressure.

15.- HS SPRENGER LONG SIDEBAR WITH 45º INCLINATION: High quality 45º inclination stirrup bar that prevents the foot from slipping out of the stirrup. SPRENGER brand guarantee.

MEASUREMENTS:

* Rider 16" (length of 41 cm. from the rear saddle bit to the Zaldi nail).

* Horse withers: from 28 cm. to 34 cm.

* Weight: 7.400 Kg.

* Length of the flank from the stirrup: 38 cm.

* Length of the cantle from underneath: 46 cm.

* Support area of the cantle on the horse's back: 41 cm.

* Taco-Muslera: 20 cm. x 8.5 cm. x 9 cm.

* Rider 16.5" (length of 42 cm. from the rear saddle flange to the Zaldi nail).

* Horse withers: from 28 cm. to 34 cm.

* Weight: 7.600 Kg.

* Length of the flank from the stirrup: 39 cm.